Push/Pull Trim
In certain applications, such as hospital rooms, hand contact with door handles is not an option, therefore turning doors into obstacles when making an ingress or egress. I-TEK has developed the perfect solution for this kind of situations.
The Push/Pull Trim offers an alternative yet convenient way to open doors. Its paddle-shaped handle is designed in such a way to eliminate the need for holding on the door handle to make it open. Simply push or pull with any part of your body and see how easy it is to open a door without your hands.
HL200 Push/Pull Trim
- Field reversible; mounting position can be adjusted according to distinctive needs.
- Conforms to ANSI/BHMA A156.2 Grade 2 Operational and Security.
- UL Listed for 3-Hour fire rating.
- Latch lengths of 2-3/8″, 2-3/4″ and 5″ available.
- Suitable for door thickness ranges between 1-3/8″~2″ without changing or adding additional mounting screws.
Specifications
| Door Range | • 1-3/8" (35 mm)~2" (50.8 mm). |
| Backset | • 2-3/8" (60 mm), 2-3/4" (70 mm), 5" (127 mm). |
| Strike | • Standard Strike (#B27 1.5 mm). • ANSI Strike available (#D27). |
| Latch Face | • Faceplates width 1" or 1-1/8" |
| Certification | • ANSI/BHMA A156.2 Grade 2 operational and security. UL Listed for 3-Hour fire rating. |
| Handing | • Non-handed. |
| Spindle | • Breakable to prevent the lock case from unlocking or being damaged. |
| Finishes | • 605, 606, 611, 612, 613, 625, 626, 630. |
Mounting Positions
HL400 Pull Trim
for Exit Devices
- For application with existing Klacci 1400/F1400 Mortise Lock Exit Devices.
- Conforms to ANSI/BHMA A156.3 Grade 1.
- UL Listed for 3-Hour fire rating.
- Ease of installation. Perfect door prep with same mounting screw hole positions that match those of the mortise lock case.
- Pull trim available only.
- HL400 is handed – specify when ordering.
Specifications
| Door Range | • 1-3/4" (45 mm)~2-1/4" (57 mm). |
| Backset | • 2-3/4" (70 mm) (used with 1400/F1400 Mortise Lock Exit Device). |
| Certification | • ANSI/BHMA A156.3 Grade 1. • UL Listed for 3-Hour fire rating. |
| Handing | • Specify handing when ordering. |
| Spindle | • Breakable to prevent the lock case from unlocking or being damaged. |
| Finishes | • 605, 606, 611, 612, 613, 625, 626, 630. |
HL9000 Push/Pull Trim
for Mortise Locks
- For application on Mortise Escutcheon and Mortise Sectional Locks.
- Conforms to ANSI/BHMA A156.13 Grade 1.
- UL Listed for 3-Hour fire rating.
- Ease of installation. Perfect door prep with same mounting screw hole positions that match those of the mortise lock case.
- Wide range of functions available to choose from.
- Narrow and wide Escutcheon plate sizes plate available, conforms to ANSI A115.1.
Specifications
| Door Range | • 1-3/4" (45 mm)~2-1/2" (64 mm). |
| Backset | • 2-3/4" (70 mm) (used with M Series Mortise Locks). |
| Certification | • ANSI/BHMA A156.13 Grade 1. • UL Listed for 3-Hour fire rating. |
| Trim Handing | • Non-handed. |
| Case Handing | • Field reversible without removing case. |
| Spindle | • Breakable to prevent the lock case from unlocking or being damaged. |
| Spacing | • 3-5/8" (92 mm) center cylinder to spindle. 2-2/16" (62 mm) center thumbturn to spindle. |
| Case Size | • 4-5/15" x 6" x 1" (110 mm x 152 mm x 25 mm). |
| Deadbolt | • 1" (25 mm) throw, stainless steel. |
| Latchbolt | • 3/4" (19 mm) throw, with anti-friction tongue, all stainless steel. |
| Door Preparation | • Conforms to ANSI A115.1. |
| Finishes | • 605, 606, 611, 612, 613, 625, 626, 630. |
